1:1 Pixel Mapping Modes for SD/HD

Displays the original image resolution without scaling to match a certain resolution or an aspect ratio.

3G-SDI Level A/B

Supports 3G-SDI Level A/B input.

Audio Level Meter Display

Displays the level of the embedded sound signal together with the video signal input through the terminal such as SDI or HDMI.

Blue Only / Mono

Red and Green channels are not used and only Blue or Monochrome channel is used to display the screen. This function is used to adjust the color tones (tones and saturation) of the screen using the SMPTE Color Bar. For example, after displaying the Blue channel, adjust the Color (or Saturation) and Tint (or Hue) so that the original Magenta and Cyan are of the same brightness, and the original Gray and Blue are of the same brightness.

Closed caption

Closed caption.

Focus Assist

Assigns a color to the pixels on the boundaries of the image to inform the user to achieve the best focus. With this function, user can easily differentiate the focused area from out-focused area especially when shooting with a shallow depth of field.

H/V Delay

Allows you to check the Blanking area and synchronize signals by displaying the horizontal and vertical intervals in the center of the screen.

Key Lock

Key Lock is a password-protection function of the OSD menu so that non-authorized users cannot change the setting of the monitor.

Luma(Y') Zone Check

Displays the Luma(Y’) level of the input image in colors. Each pixel’s Y’ analyzed and changed to a certain color or zebra pattern according to the Index on the right side of the screen.

Marker

Displays various kinds of aspect ratios on the screen. Wide range of markers and security areas are available with line color and curtain transparency selection. A User Marker is available if any of standard markers fits your requirements.

Range Error

Analyzes the input signal’s Luma (Y’) and chroma (C’) information. If the input signal exceeds the designated minimum and maximum values, the pixel will blink. This function allows for the user to easily identify any issues with exposure.

Time Code Display

Displays the Timecode information on the screen.

UMD

Displays user customized 8 characters or source ID or Tally signal of Ancillary (ANC) data on the screen.

User Aspect

Adjusts the Width /Height display ratio.

Various Scan Modes

Controls the size of the image. Overscan: Extra area around the four edges of the image that may not be seen reliably by the viewer. Underscan: Constrains the size of the image so the monitor shows everything the camera is seeing. 1:1 pixel: Displays the original image resolution without scaling to match a certain resolution or an aspect ratio.

Waveform/Vector Scope

Waveform Y: Displays the Luma(Y’), Cb, Cr component of the input signal into waveform.
Vector Scope: Displays the color components ‘B-Y’ and ‘R-Y’of the input signals onto the X-Y axis.

Zoom

Magnifies the input signal from 0% to 90%.

Display Spec

Size	23"
Resolution	1920 X 1080 (16 : 9)
Pixel Pitch	0.2652mm
Color Depth	16.7M
Viewing Angle	178°(H) / 178°(V)
Luminance	300cd/m2
Contrast Ratio	1000:1
Display Area	509(H) x 286(V) mm

Input

1 X BNC	Analog Input (Composite)
2 X BNC	3G-SDI A/B Channel Input
1 X HDMI	HDMI Input
1 X DVI	DVI Input

Output

1 X BNC	Analog Output (Composite)
1 X BNC	SDI A/B Selected Channel Output (Loop Through Out)

Input Signal

Analog	CVBS
3G SDI	2.970Gbps
HD SDI	1.485Gbps
SD SDI	270Mbps
HDMI	640x480/720x400/800x600/1024x768/1280x768/ 1280x1024/1366x768/1920x1080/1080p(24/25/30/ 50/60)/1080i(50/60)/720p(50/60)/480i(60)/ 480p(60)/576i(50)/576p(50)
DVI Analog	640x480/720x400/800x600/1024x768/1280x768/ 1280x1024/1366x768/1920x1080
DVI DP	640x480/720x400/800x600/1024x768/1280x768/ 1280x1024/1366x768/1920x1080/1080p(24/25/30/ 50/60)/1080i(50/60)/720p(50/60)/480i(60)/ 480p(60)/576i(50)/576p(50)

SDI Input Signal Formats

SMPTE 425M-A/B	1080p (60/59.94/50/30/29.97/25/24/23.98/30sF/ 29.97sF/25sF/24sF/23.98sF) / 1080i (60/59.94/50)
SMPTE 296	720p (60/59.94/50)
SMPTE 274	1080i (60 / 59.94 / 50) 1080p (30/29.97/25/24/24sF/23.98/23.98sF)
SMPTE 260	1035i (60/59.94)
SMPTE 125	480i (59.94)
ITU-R BT.656	576i (50)

Audio

Audio In	Embedded Audio/Analog Stereo (Phone Jack)
Audio Out	Analog Stereo (Phone Jack), Internal Speaker(Stereo)

FPGA Functions

,  3G-SDI Level A/B,  Audio Level Meter Display,  Blue Only,  Focus Assist,  H/V Delay,  Key Lock,  Luma(Y') Zone Check,  Marker,  Mono,  Range Error,  Time Code Display,  UMD,  User Aspect,  Various Scan Modes,  Waveform/Vector,  Zoom

Closed Caption

CC-608 ANC,  CC-608 LINE 21,  CC-708

Calibration

TVLogic Color Calibration Utility

Other Functions

REMOTE	TVLogic’s specification
USB	Firmware update by USB memory stick
Ethernet

Options

Carrying Case,  Gold Mount,  ND Acrylic Filter,  Rack Mount Kit(Single),  V-Mount

Dimensions

Basic Accessory

Optional Accessory

[Release Notes]
Date : 19. 03.12
[LVM-182W/232W [MCU Firmware Update : V17, FPGA : V04 ]
1. Debugged the Scan 1:1 key error
2. Improved the SDI Through Out
3. Debugged the Tally error
4. Debugged the screen error with 3G Level B

Date : 18. 06.08
[LVM-176W/246W [MCU Firmware Update : V16]
1. Added Eco Saving Mode

Date : 17. 09.25
[LVM-176W/246W [MCU Firmware Update : V16]
1. Improved SD SDI Position

Date : 17. 06.29 [LVM-182W/232W [MCU Firmware Update : V14]
1. Added 4K 2Si payload.

Date : 16. 01.12
[LVM-182W/232W [MCU Firmware Update : V11]
1. Debugged to come up [No signal] when swithching a signal from Evertz router.
2. Activate [Unstable count] feature.
* [Unstable count] feature can be used to set switching timing on the monitor.

Date : 15. 04.01
[LVM-182W/232W [MCU Firmware Update : V10]
1. Added Audio Level Meter (8CH, 8CH Side, 4CH, 4CH Side)
Before : [Off]-[16CH(Hor.)]-[16CH(Ver.)]-[Off]
After : [Off]-[16CH(Hor.)]-[16CH(Ver.)]-[8CH]-[8CH Side]-[4CH]-[4CH Side]-[Off]

** When selecting 8C or4CH, activate to select Group.
- 8CH & 8CH Side : [G1+G2]-[G2+G3]-[G3+G4]-[G1+G3]-[G1+G4]-[G2+G4]
- 4CH & 4CH Side : [G1]-[G2]-[G3]-[G4]

Date : 14. 09.05
[LVM-182W/232W [MCU Firmware Update : V07]
1. Improved Audio Volume.
2. Support 1080p feeding Analog(RGB).
3. Add Focus Assist function on BLUE ONLY Key.

Date : 14. 04.30
[LVM-182W/232W [MCU Firmware Update : V06]
1. Activate Dithering function.

Date : 13.11.15
[LVM-176W [MCU Firmware Update : V03] LVM-176W/182W/232W [FPGA Update : FPGA_03]
1. Debugged vertical noise on the screen.
2. Debugged key malfunction when putting Menu key then Enter or Direction key.
[Caution]
The firmware of MCU(v03) can be used for LVM-176W, 182W, and 232W.
However, the firmware of FPGA(v03) is the only for LVM-176W.(file name: LVM-176_V03_R3_131112.rbf)
The next version of MCU(v04) will be combined all models.

Date : 13.07.23
[LVM-176W/182W/232W [MCU Firmware Update : V02] [FPGA Update : FPGA_02]
1. Debugged screen noise when feeding SDI signal(1080p(30))
2. Debugged error on Level Meter when turning on Audio Level Meter feeding HDMI signal.
3. Debugged showing channel error when turning on Audio Level Meter feeding HDMI signal.
4. Debugged mutted sound when turning on and off Soft Power feeding SDI and HDMI signals.
5. Debugged screen noise of colors when feeding 1080 24p/23.98p.(LVM-232W)