Blue Only / Mono

Red and Green channels are not used and only Blue or Monochrome channel is used to display the screen. This function is used to adjust the color tones (tones and saturation) of the screen using the SMPTE Color Bar. For example, after displaying the Blue channel, adjust the Color (or Saturation) and Tint (or Hue) so that the original Magenta and Cyan are of the same brightness, and the original Gray and Blue are of the same brightness.

H/V Delay

Allows you to check the Blanking area and synchronize signals by displaying the horizontal and vertical intervals in the center of the screen.

Marker

Displays various kinds of aspect ratios on the screen. Wide range of markers and security areas are available with line color and curtain transparency selection. A User Marker is available if any of standard markers fits your requirements.

Display Spec

Size	31.1"
Resolution	4096 X 2160 (17 : 9 )
Pixel Pitch	0.1704mm
Color Depth	1.07B
Viewing Angle	178°(H) / 178°(V)
Luminance	500cd/m2
Contrast Ratio	1450:1
Display Area	698(H) x 368(V) mm

Input

4 X BNC	3G-SDI A/B/C/D Channel Input
4 X HDMI	HDMI A/B/C/D Channel Input, HDMI1.4 A/B

Output

4 X BNC	3G-SDI A/B/C/D Channel Output
4 X HDMI	HDMI A/B/C/D Channel Output

Input Signal SDI Input Signal Formats Audio

Audio In	Embedded Audio/Analog Stereo (Phone Jack)
Audio Out	Analog Stereo (Phone Jack), Internal Speaker(Mono)

FPGA Functions

1:1 Pixel Mapping Modes for SD/HD,  Blue Only,  H/V Delay,  Marker,  Mono

Closed Caption Calibration

TVLogic Color Calibration Utility, 3D LUT & Adjustable Gamma

Other Functions

REMOTE	TVLogic’s specification
USB	Firmware update by USB memory stick
Ethernet	Ethernet Control support

Options

Carrying Case,

Dimensions

- Main Body : 759.8 x 448.5 x 146.3 (mm) / 29.91 x 17.66 x 5.76 (inch)
- With stand : 759.8 x 501.5 x 255 (mm) / 29.91 x 19.74 x 10 (inch)
- Weight : 24.8kg / 54.67lbs

[Release Notes]
Date : 17.07.13
LUM-310A [CPU Firmware Update : V006 -> V007]
1. Fixed a bug. (Abnormal image when feeding the 3G-A signal from Grass Valley Frame Synchronizer)

Date : 17.05.25
LUM-310A [CPU Firmware Update : V005 -> V006]
1. Fixed a bug.(OSD doesn't disappear automatically after changing the bit depth from 10 bit to 8 bit)

Date : 16. 10.24
[LUM-310A [FPGA A Firmware Update : V01 -> V02]
1. Debugged screen noise on [UD Mode].

Date : 15. 12.21
[LUM-310A [CPU Firmware Update : V003 -> V004]
1. Added 4K payload ID.

Date : 15. 10.01
[LUM-310A [CPU Firmware Update : V002 -> V003]
1. Deugged FPGA A update problem of early version of a product.